Blog
Loss-cost states: how advisory loss costs turn into your actual rate
How an advisory loss cost and an insurer's loss cost multiplier become a filed rate, why insurers on the same loss costs differ, and how to read one.
In a loss-cost state, an industry advisory organization estimates the claims-and-claim-handling part of a rate, and each insurer then multiplies that estimate by its own loss cost multiplier (LCM) to cover its expenses, taxes and profit. The multiplier is the insurer's decision; the loss cost is advisory. The regulator reviews the result, and the two insurers who start with identical loss costs can still end with different prices, because their multipliers differ.
So "who really sets rates" has a three-part answer: the advisory organization supplies a cost benchmark, the insurer supplies the multiplier and any modifications, and the state decides whether the combined result is allowed. This article walks through that pathway with the statutes, regulations and forms we could open, a worked example with invented numbers, and a routine for reading a multiplier in a filing.
What a loss cost is, in the statutes
Strip the word to its meaning: a loss cost is the part of a rate that pays claims. Texas defines it in its insurance code. According to Insurance Code 2251.002, a "prospective loss cost" is the portion of a rate that does not include a provision for expenses or profit other than loss adjustment expenses, and that is based on historical aggregate losses and loss adjustment expenses, projected by development to their ultimate value and trended to a future point in time. In the same section, "rate" means the cost of insurance per exposure unit, whether expressed as a single number or as a prospective loss cost, adjusted to account for expenses, profit and individual insurer variation in loss experience, before individual risk variations are applied.
Three ideas in that definition matter for what follows.
- Projected, not just historical. Past claims are developed to their final value, because many are not closed when the data is cut, and then trended forward. The article on trend selection in rate filings: how actuaries project future costs covers the trend step.
- Expenses and profit are left out. A loss cost is a claims number. It is not a price.
- Individual risk variations come after. Your own driver and vehicle factors are applied on top of the base rate; see base rates and relativities: how a premium is multiplied together.
Verisk's Insurance Services Office, one widely used advisory organization, describes its product in a 2019 brochure: advisory prospective loss costs use historical data to project average future claim costs and loss adjustment expenses, and can be viewed by category including coverage, class and territory. The brochure says insurers can use them to determine prices by coverage, state, territory, class, policy limit, deductible and other categories, and that because the loss costs are submitted to state regulators for review, an insurer's own staff can concentrate on other decisions. The company is describing its own product, so read that as marketing from the source, and see the neutral explainer in Verisk (ISO) advisory loss costs: the data behind many insurers' rates and ISO and advisory organizations: how shared loss data shapes rates.
The pathway, step by step
- An advisory organization collects statistics. New Hampshire's RSA 412:23 lists what such an organization may do: develop statistical plans including territorial and class definitions, collect statistical data from members and others, and prepare, file and distribute prospective loss costs. It may distribute manuals of rating rules and schedules, but only those that do not include final rates, expense provisions, profit provisions or minimum premiums. That last limit is why the organization cannot hand an insurer a finished price.
- The organization files loss costs with the state. The state reviews and can accept or reject them. California, which keeps a public record of filings, says on its rate filings page that filings made by advisory organizations are available to the public but can be viewed only at its public viewing rooms in San Francisco or Los Angeles.
- An insurer decides whether to adopt. In New Jersey, an insurer must be a member or subscriber of the organization and file its multiplier on the department's adoption form; the regulation says the insurer's final rates "shall be a combination of the prospective loss costs and the loss costs multiplier" in that form (N.J.A.C. 11:13-8.4). In Kentucky, an insurer that is a member, subscriber or service purchaser may adopt all or some of the loss costs; if it files a multiplier, it can apply it to one specific filing or elect to have it apply to all future loss costs filed by the organization (806 KAR 13:150).
- The insurer may modify the loss cost. New Jersey's rule allows modifications based on the insurer's own anticipated experience, up or down, with supporting documentation.
- The insurer sets expense and profit provisions. New Jersey says insurers may vary expense loads by line, subline or classification, and may use variable or fixed expense loads or a combination.
- Later loss cost revisions flow through. New Jersey provides that once a multiplier has been filed, it is deemed automatically applicable to the organization's later loss cost filings. An insurer that wants to use a revision with a new multiplier, or not use it at all, must say so within 30 days of the revision's effective date.
- The final manual page. New Jersey's rule also calls for a final printed manual page showing the loss cost modification, filed within 30 days of the effective date of the insurer's rates, from an insurer that has not adopted the organization's loss cost as filed.
A caution about generalizing. These are rules in two or three jurisdictions we could open. Many insurers file their own rates without relying on an advisory organization, and Texas, for example, allows an insurer to file rates, rating manuals and supporting information and to use a rate on and after the date it is filed (Insurance Code 2251.101). We did not find a source that says which personal auto insurers rely on advisory loss costs, so the filing for your insurer is the only reliable answer.
The arithmetic: how a multiplier is built
New Jersey publishes its adoption form in the regulation's appendix. The edition we opened is dated 5-15-95 and is the commercial lines version, so treat it as an illustration of the structure rather than as a current personal auto template. The structure is simple.
- Item 11: the loss cost modification, expressed as a factor (1.000 if the insurer adopts without modification).
- Item 12: the expense and profit provisions as percentages of premium: production expense, general expense, taxes, licenses and fees, underwriting profit and contingencies, and other, summed to a total.
- Item 13: the expected loss ratio, which the form defines as 100 percent minus that total.
- Item 14: the company loss cost multiplier, defined as the loss cost modification factor divided by the expected loss ratio in decimal form.
- Item 16: the rate level change, defined as the ratio of the new multiplier to the current multiplier, minus 1.
In words: if 28 percent of each premium dollar is set aside for expenses, taxes and profit, 72 percent is left to pay claims, and the multiplier is 1 divided by 0.72.
A worked example, with numbers defined here
All numbers below are hypothetical. Suppose the advisory loss cost for one coverage in one territory and class is $400 per car-year.
| Insurer | Modification | Expense, tax and profit total | Expected loss ratio | Multiplier | Rate |
|---|---|---|---|---|---|
| A | 1.00 | 12% production + 8% general + 3% taxes + 5% profit = 28% | 72% | 1.00 / 0.72 = 1.389 | $400 x 1.389 = $555.56 |
| B | 1.00 | 8% + 7% + 3% + 2% = 20% | 80% | 1.00 / 0.80 = 1.250 | $400 x 1.250 = $500.00 |
| C | 1.05, with support | 28% | 72% | 1.05 / 0.72 = 1.458 | $400 x 1.458 = $583.33 |
Same loss cost, three rates: $500.00, $555.56 and $583.33. The $55.56 gap between A and B comes entirely from expense and profit choices, and C's extra $27.77 over A comes from an insurer's own judgment that its claims will cost 5 percent more than the benchmark.
Now a filing. Suppose the advisory organization raises the loss cost 4 percent, and insurer A raises its profit provision from 5 to 7 percent, so its expense total goes from 28 to 30 percent.
- New multiplier: 1.00 / 0.70 = 1.4286.
- Multiplier change: 1.4286 / 1.3889 = 1.0286, or +2.9 percent.
- Combined rate change: 1.04 x 1.0286 = 1.0697, or about +7.0 percent.
- New rate: $400 x 1.04 x 1.4286 = $594.29, which is 7.0 percent above $555.56.
A filing summary showing "+7.0 percent" would hide the fact that 4 points came from loss costs and about 3 from the insurer's own multiplier. That split is the useful thing a loss-cost filing reveals.
Why identical loss costs yield different rates
- Different expense loads. Selling through captive agents, independent agents or direct to consumers has different costs. New Jersey's rule lets insurers vary expense loads by line, subline or classification, so the expense piece can differ by coverage as well.
- Different profit and contingency provisions. Each insurer picks its provision and defends it in the filing; the regulator tests it against the rate standard in the excessive-inadequate-unfairly-discriminatory test.
- Different modifications. An insurer with better or worse claims results than the industry can file a modification, with support.
- Different books of business. The loss cost is an average for a class and territory. An insurer's rating plan, tiers and discount structure then move prices for particular drivers; see base rates and relativities: how a premium is multiplied together.
- Different timing. Loss costs and multipliers are effective on different dates, so two insurers can be at different points in their cycles. See why insurers disagree on your price: appetite and rate adequacy.
The consumer-facing consequence is the reason to shop: price gaps are not noise, they are the sum of decisions in the multiplier.
How states differ in review
| Question | Example from the sources opened |
|---|---|
| Does the insurer have to file anything to adopt advisory loss costs? | New Jersey: yes, a multiplier on the adoption form. Kentucky: yes, notice of adopting all loss costs or a multiplier tied to a filing. |
| Does the multiplier carry forward? | New Jersey: yes, deemed automatically applicable to later loss cost filings until withdrawn or revised. Kentucky: the insurer elects, filing by filing or for all future filings. |
| Can the insurer change the loss cost? | New Jersey: yes, with supporting documentation. |
| Can the advisory organization include expenses and profit? | New Hampshire: no, advisory manuals may not include final rates, expense provisions, profit provisions or minimum premiums. |
| When can the rate take effect? | Texas: a filed rate may be used on and after its filing date, subject to disapproval. Prior approval states differ. |
| Where can the public see advisory filings? | California: at public viewing rooms in San Francisco and Los Angeles, as of November 2026. |
Kentucky's regulation also requires a filing that references an advisory organization's loss costs to be accompanied by a state form calculating the loss cost multiplier, and requires a separate form for each company in the filing. That is the kind of detail you want a department to have, and it tells you what to look for.
What a consumer can see, and where the multiplier lives
If your insurer's filing uses advisory loss costs, look for these words in the filing's cover letter, rate pages or memorandum: "reference filing," "advisory organization," "loss cost multiplier," "adoption," "expected loss ratio." In New Jersey-style filings the multiplier is on a form. In Kentucky, it is on the LC-1 calculation form named in the regulation. In states that use other layouts, the same information may appear in the actuarial memorandum's expense and profit exhibit.
Steps to find it:
- Find the filing using the lookup routine.
- Search the downloaded files for "multiplier" and "loss cost."
- If nothing turns up, the insurer may file complete rates rather than loss cost adoptions. Ask the department which method applies.
- Note the multiplier, the expense and profit lines and the effective date.
A limit: some advisory organization material may be viewable only in person (California) or marked confidential, so a missing piece does not necessarily mean a missing filing.
How to read multipliers in a filing
Use this checklist when you have a filing open.
| Look for | Why it matters |
|---|---|
| The multiplier and its prior value | The ratio of new to old is the insurer's own contribution to the change |
| Loss cost revision percent | The advisory part of the change |
| Expense lines (production, general, taxes) | Differences from other insurers' loads show up here |
| Profit and contingencies provision | The line regulators test hardest for excess |
| Modification factor | Above 1.00 means the insurer claims worse-than-benchmark experience; below 1.00, better |
| Effective dates | Loss costs and multipliers may not start on the same day |
| Expected loss ratio | The share of premium left for claims; it is 100 percent minus the provisions |
Run the decomposition from the worked example: take the filing's overall change, divide out the loss cost revision, and what is left is the multiplier's contribution. If you find the numbers do not reconcile, ask the department; Kentucky and New Jersey both require supporting calculations on their forms.
The broader picture of where a premium dollar goes is in where each premium dollar goes: claims, commissions and profit. The connection between loss ratios and filing justifications is in loss ratios and rate filings: how insurers justify an increase.
Use this when you shop
- Treat price gaps as multiplier gaps. Identical coverage at three insurers often differs by more than the raw claims cost does.
- Do not read a filing as a verdict. A high multiplier is not wrong by itself; it is a number to test against the state's standard.
- Quote the same coverage. Use the car insurance quote comparison worksheet so you compare like with like.
- Re-shop after a filing. If your insurer's filing shows a multiplier increase, collect two other quotes before renewal.
Common questions
Who actually sets my rate?
Three parties share the work: an advisory organization, if the insurer uses one, estimates the claims cost; the insurer sets the multiplier and any modification; the state reviews. Some insurers file complete rates instead.
Is the loss cost multiplier the same as the loss ratio?
No. The loss ratio is claims divided by premium. The multiplier converts a claims-cost estimate into a rate. Under the New Jersey form, the expected loss ratio is the reciprocal link between them: the multiplier equals the modification divided by the expected loss ratio.
Are loss costs binding?
No. They are advisory. New Jersey's rule lets insurers modify them with support, and Kentucky lets insurers adopt all or only some.
Does every state use loss costs for auto?
We cannot say. Our sources show loss-cost mechanics in New Jersey, Kentucky, Texas's definitions and New Hampshire's advisory organization statute. Check your state's department page.
Key takeaways
- A loss cost is the claims part of a rate; the loss cost multiplier adds expenses, taxes and profit.
- The multiplier equals the loss cost modification divided by the expected loss ratio, which is 100 percent minus the expense and profit provisions.
- Identical loss costs yield different rates because multipliers, modifications and expense loads differ.
- In a filing, separate the loss cost revision from the multiplier change to see the insurer's own contribution.
- Price gaps between insurers are real, so compare quotes on identical coverage.
Sources
- Texas Insurance Code 2251.002, definitions of prospective loss cost, rate and filer, checked November 2026 (statute text as reproduced by Public.Law).
- Texas Insurance Code 2251.101, filing and use of rates, checked November 2026 (Public.Law).
- N.J.A.C. 11:13-8.4 (Cornell LII), New Jersey rules for adopting loss costs and filing multipliers, checked November 2026.
- New Jersey Department of Banking and Insurance: Loss cost adoption form, the multiplier calculation items, edition dated 5-15-95, commercial lines version, checked November 2026.
- Kentucky: 806 KAR 13:150, adoption options and the loss cost multiplier calculation form, checked November 2026.
- New Hampshire RSA 412:23, what advisory organizations may file and distribute, checked November 2026.
- Verisk: ISO's advisory prospective loss costs (2019 brochure), the organization's own description of its product, checked November 2026.
- California Department of Insurance: Rate filings, public viewing rooms for advisory organization filings, checked November 2026.